|
Product Details:
|
| Product Name: | Naphtha Liquid Chloride Removal Adsorbent | Appearance: | Black Extrudates |
|---|---|---|---|
| Particle Size，mm: | ∮4×5-20 | Bulk Density，kg/L: | 0.6-0.7 |
| Crush Strength，N/cm ≥: | 90 | Chemical Composition: | Metal Oxide-promoters |
| Loss On Ignition，% ≤: | 2 | Chloride Capacity，% ≥: | 12 |
| High Light: | catalyst support balls,alumina supported catalysts |
||
Naphtha liquid chloride removal adsorbent
Naphtha liquid chloride removal adsorbent is an outstanding adsorbent most commonly
used in adsorbing hydrogen chloride from reformate ,this kind of chloride removal adsorbent
is made by special technical process of carrier and add some special additives .So it has the
following advantages :It has high chloride capacity , high precision chloride removal ability , resistance
to soak and good crush strength .
This kind of chloride adsorbent suitable for straight-run naphtha and secondary processing naphtha to
precision chloride removal , it also be used For precise Chloride removal of light ,heavy C5,C4 and liquid gas.
HTCR-M Naphtha chloride removal adsorbent has been successfully used in a lot of industry units In North America, the
Middle East
| Item | Index | Item | Index |
| appearance | Black extrudates | Chemical composition | Metal oxide-promoters |
| Particle size,mm | ∮4×5-20 | Loss on ignition,% ≤ | 2 |
| Bulk density,kg/L | 0.6-0.7 | chloride capacity,% ≥ | 12 |
| Crush strength,N/cm ≥ | 90 |
normal operating conditions:
| Process parameters | pressure Mpa | Tem ℃ | Space velocity,hr-1 |
| Room pre-6.0 | Room tem -200 | 1.0-5.0 | |
| Raw material | HCL content ≤500ppm | ||
| processed products | HCL content≤0.1ppm | ||
Packing :iron drums innerlining double-layer plastic bags.
Contact Person: Mr. James.Li
Tel: 86-13706436189
Fax: 86-533-6076766
