|
Product Details:
|
| Product Name: | Dimethyl Catalyst | Appearance: | White Or Light Yellow Circular Bar |
|---|---|---|---|
| Chemical Composition: | Main Components Is Al2O3 | Size: | Diameteφ3~4mm ,long:10~20mm |
| Bulk Density: | 0.45~0.50 Kg/L | Specific Surface Area: | 250~350 M2/g |
| Average Crushing Strength: | Radial≥80N/cm | Abrasion: | ≤5％ |
| Highlight: | hydrotreating catalyst,solid phosphoric acid catalyst |
||
Dimethyl catalyst efficient catalyst for methanol production of two methyl
It is supported by γ-Al2O3,when adding a certain amount of preparation of heteropoly acid co catalyst to improve its activity, selectivity and heat resistance.
DME-1 catalyst is suitable for gas phase methanol dehydration to produce dimethyl The catalyst can be used to prepare dimethyl by using fine methanol or crude methanol (methanol synthesis process without distillation separation of products) as raw material.The industrial production shows that the catalyst has the advantages of good activity, high selectivity, small bulk density, wide temperature adaptation range, good thermal stability, long service life, etc., it is a new and efficient catalyst for methanol production of two methyl
Physical and chemical index:
| Appearance | White or light yellow Circular bar |
| chemical composition | Main components is Al2O3 |
| size | Diameteφ3~4mm ,long:10~20mm |
| Bulk density | 0.45~0.50 kg/L |
| specific surface area | 250~350 m2/g |
| Average crushing strength | radial≥80N/cm |
| abrasion | ≤5％ |
qualification
| Methanol conversion rate | ≥82% |
| dimethylselectivity | ≥99.5% |
process conditions
| temperature | 240℃~400℃ |
| pressure | 0.1~1.2 MPa |
| The liquid space velocity | 1~2 h-1 |
Contact Person: Mr. James.Li
Tel: 86-13706436189
Fax: 86-533-6076766
