|
Product Details:
|
| Product Name: | Carbon Monoxide Removal Adsorbent | Appearance: | Black Cylinders |
|---|---|---|---|
| Crush Strength,N/cm: | Min 80 | Chemical Compositions: | CuO-AI2O3 And Promoters |
| Particle Size, Mm: | Ф6×4-5 | Bulk Density ,kg/l: | 1.2-1.4 |
| Specific Heat,J/g.k: | 1 | ||
| High Light: | hydrotreating catalyst,solid phosphoric acid catalyst |
||
Carbon monoxide removal adsorbent for carbon monoxide removing from propylene ,ethylene, butylene and other chemical materials
It is mainly used for carbon monoxide removing from propylene ,ethylene, butylene and other chemical materials. Since being developed, it has been successfully applicated in several industry units . All the users of COR-1 are very satisfied with its outstanding performance such as high crushing strength, extraordinarily high carbon monxide pick-up capacity ,very good low temperature activity and thorough carbon monoxide removal. its comprehensive performance is very superior to other same kind of industry products all over the world. The outlet carbon monoxide content can be decreased from about 100ppm to less than 0.5ppm. furthermore, it can effectively remove arsenic,oxygen etc.
Adsorbent COR-1 can be reused after regenation through nitrogen-air.
chemical and physical properties:
| item | Target | item | Target |
| appearance | Black cylinders | Particle size, mm | Ф6×4-5 |
| Crush strength,N/cm | min 80 | Bulk density ,kg/l | 1.2-1.4 |
| Chemical compositions | CuO-AI2O3 and promoters |
Specific heat,J/g.k | 1 |
Typical operating conditions:
Operating conditions |
pressure,Mpa | temperature,℃ | Space velocity(vol) , hr-1 |
| 0.1-4.0 | 100-200 | 500-2000 | |
| Unprocessed material | Carbon monoxide content ,100ppm;arsenic content, 1000ppb. | ||
| Processed material | Carbon monxide content ,max 0.5ppm ；arsenic content, max 10ppb. | ||
Packing : one- ton bag or according to customers’ demand.
Contact Person: Mr. James.Li
Tel: 86-13706436189
Fax: 86-533-6076766
